Romondes SM601 Car Smoke Leak Tester EVAP Smoke Machine Automotive Leak Detector, Vacuum Leak Tester, Diagnostic Fuel Pipe Leakage Locator for All Cars, Motorcycles, Snowmobiles, ATV, Light Trucks, Boats

How to Perform a Smog Test with SM601 Automotive Diagnostic Smoke Leak Tool?

Step1: Mount the hook and shop air adapter to the SM601 smoke leak detector, plug the power cord into the socket.Step2: Fill (mineral Oil based) smoke oil into the SM601 auto smoke machine, from refill port on the top.Step3: Connect shop air supply, connect 12V vehicle power, introduce shop air to the SM601 fuel leak tester, turn the Flow Dial anti-clockwise to open the air flow, switch on the power at the back of the unit, then SM601 smoke machine automotive will start to generate smoke.Step4:In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

Overheat & Anti-frost Protection

SM601 EVAP Smoke Machine is equipped with a smart protector. When the temperature of the device exceeds eg. 75°C , the power will be intelligently activated to turn it off to ensure the safety of the operator and the device, also suitable for low temperature operation.Note: Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.And don't use SM601 more than 20 minutes.Excessive heat will cause the tube to melt.

Saving you the cost of having to go to a repair shop every time you need to test for faults, this device pays for itself in one use.

With the superb design, the SM601 vacuum smoke machine can out put smoke within seconds and discover leakage holes as small as 0.2mm. Adopts the principle of isolated heat conduction, the smoke created from the machine is non-toxic.● Output pressure: 0.5PSI● Output Volume:< 8LP M● Power Supply: DC12V● Current: 5AMP● The flow meter indicates the leak size:● For DTC P0456, the meter should be at 0.1 LPM.● For DTC P0442, the meter should be at 0.5 LPM.

How SM601 Smoke Leak Detector Was Born?

Have you met some troubles like below when using an smoke machine automotive?- Smoke turns to liquid almost instantly inside whatever you are testing?- The smoke is very thin, impossible to see and find leaks?- Fluid leak cause catastrophic engine damage?

Why You Need An Automotive Smoke Machine?

Romondes SM601 Car Smoke Leak Detector is a universal and professional auto pipe leak detect tool, it will help you to locate hard-to-find leaks in any sealed system, such as Cooling System Test, Car Sealing Test, Throttle Shafs, Engine Block Test, Intake System Test, Exhaust Systems Test, Crankcase system test, Fuel Tank System Test, Turbo System Test, Various Pipe Fittings Test, etc.✔️EVAP System: Since the fuel tank evaporation system is a completely closed system, any small leak may lead to failure. Fuel vapor leaking into the atmosphere can cause waste and pollution, engine shuddering and other problems.✔️Fuel Tank System: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system.✔️Car Sealing Test: Poor air tightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof ,etc.✔️Exhaust System: produces noise pollution and air pollution, and the leakage area will soon produce rust and corrosion, leading to the gradual expansion of the leakage area.✔️Intake System: It will lead to insufficient intake pressure and difficulty to bring up the power.✔️Crankcase System: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.✔️Turbo Test: The leakage of coolant would cause the engine to report high water temperature.✔️Vacuum pipe leaks: Vacuum pipes are located between complex and compact power system components, making it difficult to detect the location of leaks in depth.

After five generations of technological innovation, SM601 Smoke Leak Detector was born. Avoiding all the disadvantage of past technologies, SM601 has these advantages:

✔️Easy to Use: With easy-use function and portable design, the hook allows you to hang it on your hood latch, and conical adapter will fit most intakes.✔️Powerful and Durable: The third-generation technology uses heating wire and wick cotton, needs to be replaced frequently and the smoke has a peculiar smell. The fourth-generation technology uses ceramics heating, it's very fragile during transportation and use. SM601 auto smoke machine avoids these shortcomings, as a durable smoke detector, it also saves you a lot of money.✔️Output Smoke in Seconds: Output lots of smoke within 30s to detect the leaks in pipe system, reducing diagnostic time dramatically.✔️Safe for All Vehicles: Protect vehicles from high pressure damage, also avoid fluid leak cause engine damage.

Romondes SM601 Diagnostic Leak Detector can compatible with cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, beach bikes, heavy trucks and speedboats and more. It is a universal smoke tester.

*Note: Like most EVAP smoke machines in the market, SM601 smoke leak detector need to connect air supply, if you want an car smoke machine with its own air supply, we would recommend ANCEL S2000 which has its own air compressor.

Product Package:

1*Main Unit1*Smoke Delivery Hose1*Power Cord1*Hook1*Intake Adapter1*Shop Air Trunk (USA)1*EVAP Service Port Adapter1*EVAP Removal Tool