Shenyang Tianxing Webster Hardness Tester/Aluminum Alloy Brass Stainless Steel W-20/20a/20b/B75/B92
A portable instrument that can quickly test the hardness of soft metals on site, which meets China Nonferrous Standards YS/T420 and American standard ASTM B647. ﹡It is used to check the heat treatment effect of the material and judge whether the alloy composition of the material is qualified. ﹡Test the hardness of soft metal profiles, pipes, plates and other parts. ﹡Used to test long and heavy workpieces or assemblies that are inconvenient to be sent to the laboratory. ﹡Especially suitable for the qualification inspection of batches of products on the production site. ﹡The pressure needle can work for a long time at 200-250℃. ﹡There are many models for testing aluminum alloy, copper, copper alloy and mild steel.
Volume Process: 0~20HW Indication error: 0.5HW (5~17HW) Repeatability error: 0.5HW (5~17HW) Heavy volume: 0.5kg ﹡W-20 type is often used in the production and application of aluminum profiles. ﹡W-20a type should be used when the thickness of aluminum profile is greater than 6mm. ﹡The aluminum pipe with inner diameter greater than 10mm adopts W-20 type. ﹡The thin aluminum tube whose inner diameter is less than 6mm should be changed to W-20b type. ﹡W-B75 type is often used to test brass tubes. ﹡W-BB75 type is often used to test red copper tubes. ﹡W-B92 type is often used to test stainless steel strip or cold rolled steel strip.
Standard configuration Host Webster Hardness Block (High) Webster hardness block (low) Correction wrench Spare indenter Small screwdriver Instrument case Optional accessories Webster Hardness Block (High) Webster hardness block (low) Spare indenter Correction wrench Watch head glass
model |
Scope of application |
Hardness range |
Workpiece size (mm) |
W-20 |
Aluminum alloy |
25~110HRE 58~131HV |
Thickness 0.6-6 inner diameter >10 |
W-20a |
Thickness 0.6-13 inner diameter >10 |
||
W-20b |
Thickness 0.6-8 inner diameter >6 |
||
W-B75 |
brass |
63~105HRF |
Thickness 0.6-6 inner diameter >10 |
W-B75b |
Thickness 0.6-8 inner diameter >6 |
||
W-BB75 |
8~100HRE |
Thickness 0.6-6 inner diameter >10 |
|
W-BB75b |
Thickness 0.6-8 inner diameter >6 |
||
W-B92 |
Cold rolled thin steel strip |
50~92HRB |
Thickness 0.4-6 inner diameter >10 |
Origin : Mainland China
Type : Hand Tool Parts