+
Solar Controller 12V/24V 60A 50A 40A 30A 20A 10A Solar Regulator PWM Battery Charger LCD Display Dual USB 5V Output
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
Connection
1.Connect the battery to the charge regulator - plus and minus,double check the connection is right or not2.Connect the photovoltaic module to the regulator - plus and minus.
double check the connection is right
3. Connect the consumer to the charge regulator - plus and minus.
double check the connection is right
Deinstalling
1.Disonnect the consumer to the charge regulator - plus and minus.
2.Disconnect the photovoltaic module to the regulator - plus and minus.
3.Disconnect the battery to the charge regulator - plus and minus
MODEL | PWM-E-10A | PWM-E-20A | PWM-E-30A | PWM-E-40A | PWM-E-50A | PWM-E-60A |
Battery Voltage | 12V 24V Auto | |||||
Charging Current | 10A | 20A | 30A | 40A | 50A | 60A |
Discharging Current | 10A | 10A | 10A | 20A | 30A | 30A |
Max Solar input | 48V(for 24V battery) 24V(for 12V battery) | |||||
Equalization | 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) | |||||
Float charge | 13.7V(defaul,adjustable) | |||||
Discharge stop | 10.7V(defaul,adjustable) | |||||
Discharge reconnect | 12.6V(defaul,adjustable) | |||||
Charge reconnect | 13V | |||||
Voltage of open light | Solar Panel8V(Light lights delay) | |||||
Voltage of close light | Solar Panel8V(Light off delay) | |||||
USB output | 5V/3A | |||||
Self-consume | <10mA | |||||
Operating temperature | -35°C~+60°C | |||||
Size | 133.5*70*35mm | 188*90*47mm | ||||
*all red color voltage X2 ,while using 24V system.
this solar controller is not waterproof, please install it in indoor or out of the rain
Features
1.Build-in industrial micro controller.2.Big LCD display,all adjustable parameter.3.Fully 4-stage PWM charge management.4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.5.Dual mosfet Reverse current protection ,low heat production.
This is very practical type PWM solar controller ,it is small and light ,you can use 12V and 24V Lead acid ,Gel,Sealed,Flooded,AGM Batteries.It can fully meet your home Photovoltaic system(including home lighting system )requirementsPWM-E-10A , Max Voc : 24V (12V), 48V (24V); Max Power: 120W (12V), 240W (24V)PWM-E-20A , Max Voc : 24V (12V), 48V (24V); Max Power: 240W (12V), 480W (24V)PWM-E-30A , Max Voc : 24V (12V), 48V (24V); Max Power: 360W (12V), 720W (24V)PWM-E-40A , Max Voc : 24V (12V), 48V (24V); Max Power: 520W (12V), 1040W (24V)PWM-E-50A , Max Voc : 24V (12V), 48V (24V); Max Power: 650W (12V), 1300W (24V)PWM-E-60A , Max Voc : 24V (12V), 48V (24V); Max Power: 780W (12V), 1560W (24V)
Application : Charger Controller
Model Number : PWM-E
Origin : Mainland China
Is Smart Device : No
Maximum Current : 10A 20A 30A
