Product parameter

Peak power: 500W 1200W 1600W 2400W

Actual power: 350W/550W/850W/1000W

Output waveform: modified sine wave

Output frequency: 220V / 50Hz (default)

Input voltage: 12V / 24V (battery volts and inverter volts must match)

Output voltage: 220V

Conversion efficiency: about 90%

prompt:

1 This model is a modified sine wave inverter, which can drive: mobile computers, TVs, incandescent lamps, electric fans, printers, rice cookers, electric drills, fish tanks and other resistive load equipment,

2. If you need to carry inductive load equipment, such as motors, compressors, relays, LED lights, induction cookers, refrigerators, air conditioners, water pumps, etc.,

The instantaneous power of these products at startup far exceeds the rated power (about 3-7 times), and the waveform requirements are more stringent.

To buy a pure sine wave inverter,

3. If you need to connect the car cigarette lighter, the maximum power of the car cigarette lighter is about 150W, so it can be used for the cigarette lighter hole.

The maximum power cannot exceed 150!

Package Contents:

Modified sine wave inverter

1 x user manual

1 x Alligator clip cord

1 x cigarette lighter cord

note:

1. Due to manual measurement, please allow a difference of 0.5-1 cm.

2. Due to the difference of light and screen, the color of the item may be slightly different from the picture.

3. The modified sine wave inverter should avoid "inductive load". High-power electrical products made with the principle of electromagnetic induction should not be used, such as motors, compressors, relays, fluorescent lamps, etc. This type of product requires a start current much larger (about 5-7 times) than the current required to maintain normal operation when starting. For example, a refrigerator that consumes about 150 watts of electricity during normal operation can have a starting power of more than 1,000 watts. In addition, because the inductive load generates a back-EMF voltage at the moment the power is turned on or off, the peak value of this voltage is much greater than the voltage that the car inverter can withstand, which can easily cause the car inverter The instantaneous overload affects the service life of the inverter.