Description

Solve the problem:

1. Frequent start-up loss

Traffic jam/waiting for red light, serious engine loss

2. Engine and battery start-up loss

Frequent shaking affects the ride and serious battery loss

3. Increase the cost of oil

High oil quality requirements during engine start and stop process increase vehicle usage costs

4. Damage to the electrical system in the car

Frequent starting will frequently impact the precision electrical system in the car Functions:

1. Protect the engine

Effectively prevent engine damage caused by frequent starting

2. Protect the battery

Effectively prevent the battery from being damaged due to frequent starting and prolong its life

3. Reduce fuel consumption

Reduce vehicle cost

4. Smart chip

Stable with terminal dual-core chip

5. Protect the spark plug

Effectively prevent the loss caused by frequent starting when traffic jams and other red lights

6. Fit the material

Precision manufacturing, fits the interface of the vehicle

7. Non-destructive installation

Plug and play, direct installation without broken wires

8. Closed by default

The start-stop function of the original car is automatically closed after starting the vehicle, and there is no need to manually close it after installation

9. New upgrade

Button version start and stop, more convenient and comfortable to use  installation steps: 1. Use a rocker to pry open the door trim 2. Unscrew the two screws of the fuel tank switch 3. Take out the fuel tank switch, you need to unscrew a screw inside 4. Use the rocker to pry off the trim under the steering wheel 5. Pull out the plug of the start-stop switch 6. Unscrew the three screws in the decorative plate 7. Cocked open stop buckle 8. Take out the original car and button to start and stop 9. The original car start-stop plug and the button version start-stop plug are mated 10. Put the disassembled parts back in place harness type installation steps: 1. Pry open stop switch trim 2. The start-stop automatic shut-off device is plugged into the original car plug 3. Use the special tool for plugging and unplugging the fuse to pull out the second 5A brown fuse in the first row on the right