USB 2.0 high speed extender module HUB module cable seperater one-point four-HUB module.Size: 29.5mm * 18.9mm * 4.8mm (L * W * H)

reserve the power input port on the upper left corner of the board, and mark the position of 5Vin.

Tip: When 5v ICC, IDD from USB input port is not enough after connecting high current peripherals, the external reserved power input port can be enabled.

High speed, stable heating, low power consumption is our design concept

we re-burner Linux kernel, Ubuntu, Android, windows XP ,win2000,win 7, win8,win10 and other system platform drivers in the chip.

All systems are free of drive, plug and play, and can expand the expansion module of 4 multi-interface devices in one way.

Computer motherboard (this module input has 2.54mm interface reserved)

all-in-one PC USB port expansion

expansion of USB port for notebook and tablet computers

extension of USB interface for Raspberry Pi, ARM and MIPS chip development boards

extension of advertising machine and USB interface of network TV

extension of USB port of network camera, etc.

The USB extender module has no Connecting base, and the pad of each pin is reserved. The input hole position is reserved for the main brain motherboard. The Siang pure is 2.54mm and 2.0mm single row pin. The four-way USB port is 2.0mm single row pin pin, three positioning holes with a diameter of 2mm

PCBA bare board is convenient for users to DIY various interface peripherals.

The input adopts a standard USB male interface that matches the computer. It can be directly inserted into the computer USB seat and used. Application examples, usually as a USB mouse, USB keyboard and other USB peripherals after a long time, the connecting line easily broken, resulting in peripheral doesn't work as a matter of fact, Bunsen peripherals and no damage, each peripheral can be directly welded to the following modules with wire to connect to the computer, and peripherals with wire connection failure can be restored to use again.