Description
Product name: USB 2.0 Type-C to micro-B charging data cable
Wire length: 0.03m-10m (support length customization)
Compatible range: USB-C to micro-B
Speed bandwidth: USB 2.0 standard 0.48G/bps high speed
Current capacity: 4A (measured 10cm supports 4A, 1 meter supports 3A)
Product application: devices such as single-chip development boards are connected to micro-B industrial cameras, hard disk boxes, etc. through Type-C for data transmission or charging purposes
The length of the wire refers to the part of the wire, excluding the PCB and the connector. If the PCB and the connector are included, add about 3cm.
one. Wire advantages, use ADT's self-designed wire, the wire is thin, thin and flat, and the core wire is shielded with aluminum foil for anti-interference
two. Line length advantage, from 3 cm to 10 meters can be customized
three. Multi-core wire design, support high current stability
Four. The PCB adopts high-frequency and low-resistance high-quality materials, the PCB workmanship is precise, the PCB uses high TG sheet, the thickness of the copper material is thickened to 1oz, the PCB power circuit is strengthened, and the multi-core wire design is strengthened to use 2 VBUS and 4 grounds. In this way, there are 6 power cores, the transmission current is stronger, and the high current 4A is supported.
The wire thickness of this product is only 1.3mm, and the wire can be bent or folded without affecting the use.
The wire is shielded by aluminum foil, using EMI shielding conductive polymer, the new material is used for EMI shielding, flat cable design. This technique allows each cable to be completely covered by an EMI shield of conductive polymers to prevent incoming or outgoing emissions of electromagnetic frequencies, minimising interference and performance degradation, and reducing wire weight.
