Universal Car Dent Puller Plastic Suction Cup For Pulling Vehicle Remove Dents Tabs Sheet Metal Repair Tool Kit Hammer
Features:
100% Brand new and high quality.It is made of aluminium alloy for strong strength and long durability.Used as a adapter for slide hammer or pulling tap for easy catching and pulling.A necessary component for dent repair, direct replacement for the broken one.This product does not contain Glue.Specification:Material: Aluminum AlloyHow to use this paintless dent repair kits :1.Clean the dent with a clean wet cloth; 2.Mount the glue stick(Not Included) into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth.
Model Number : paint dent repair tool
Origin : Mainland China
Material : Aluminum Alloy