Description

Description:

*1. Model: ZH-1314A1

*2. Working Voltage: DC 12.2V

*3. Heating Sheet Size: 10.5x9.5cm(LxW)

*4. Lace Length: 64cm

*5. Heating Sheet to Switch Length: 104cm

*6. Operating Temperature: -30°C to +100°C

*7. Heating Gear: 50°C-55°C-60°C-75°C-85°C(1-2-3-4-5 gear) 

*8. Material: composite fiber heating wire fabric, PVC, PP heating sheet

*9. Input Voltage: 12V

*10. Net Weight: 210g

*11. Gross Weight: 395g

*12. Packing Size: 173*133*70mm

Features:

*1. 5-GEAR HEATING SHEET: Composite fiber heating wire, covered by waterproof, anti-aging, corrosion-resistant PVC fabric, heats up fast in 10 seconds to the target temperature, 85°C of first gear(Red indicator), 75°C of second gear(Orange indicator), 60°C of third gear(Yellow indicator), 55°C of forth gear(Green indicator), 50°C of fifth gear(Blue indicator), to keep your hands warm during riding.

*2. 12V UNIVERSAL USB SUPPLY: It can be directly plugged into the SAE port. When the input voltage is lower than 11.7V, it will not power on; If lower than 12.2V, the LED light flashes for 5seconds and the heating pad powers off. Wiring Method: Red-Positive(+), Black-Negative(-).

*3. EASY SETUP: Cover the heating handlebar grip on the handlebar and tie with the provide lace, arrange the power cable with ties, and power on.

*4. IP67 WATERPROOF: Even if the switch and handlebar grips are soaked in water, they can work normally. When they need to be cleaned, unplug and wash.

*5. SAFETY PROTECTION: Built-in anti-reverse and surge protection.

Package Includes:

1Pair x Heating Handlebar Grip

2 x Lace

5 x Tie

1 x Bracket

1 x Double-side Tape

1 x Power Cable

Attention:

*1. Please select the appropriate gear according to the ambient temperature. When the temperature of the electric heating sheet cannot be sensed accurately and timely due to numbness, please use the low or middle gear first to prevent burns.

*2. This product is plugged into the USB charging port on the vehicle. Before installation, you can test whether the product is powered on normally.

*3. It is strictly forbidden to work when not riding, so as to prevent the excessive temperature of the electric handlebar cover from damaging the original handlebar.

*4. For motorcycles with 12V battery only.