Universal LED LCD TV Constant Current Board General-Purpose LCD TV Backlight Constant Current Drive Light Bar Booster Board
Universal LED LCD TV Constant Current Board General-Purpose LCD TV Backlight Constant Current Drive Light Bar Booster Board
Type A : 26-55 inch LED backlight constant current universal board booster board driver board
Product selling point
1: Wide range of applications
2: Simple to use
3: Small size
4: stable performance
5: 26-55 inch LED backlight constant current universal
Parameter
Input voltage range: 10-26V
Output voltage range: 185V
Output current: 60MA-480MA
Size: 9*6cm (manual measurement) Net weight: 41.8g
Precautions
1. The output voltage must be greater than the input voltage during use, otherwise the constant current board will not start to work.
2. The default output current of the constant current board is 60MA. You can short-circuit A1-A6 to adjust the current according to your needs. There are instructions for current adjustment on the back.
list
1*26-55 inch LED backlight constant current universal board booster board driver board
Type B: Universal 10-48 inch LED TV constant current board LCD TV backlight constant current drive booster board
Product selling point
1: Wide range of applications
2: Small size
3: stable performance
4: 10-48 inch universal type
5: Simple to use
Support 10-48 inch LED LCD TV
Input voltage range: 11V-30V
Output voltage range: 15-88V
Default current: 200MA
Size: 8.5*4.5cm (manual measurement) Weight 24.3g
Notice!
This board is easy to modify, simple and fast.
The current can be set, and the increase of the current can be implemented by shorting the solder joints.
list
1*Universal 10-48 inch LED TV constant current board LCD TV backlight constant current drive booster board
Type C : Universal 10-42 inch LED TV driver board LCD TV backlight constant current board booster board
Product selling point
1: 10-42 inch LED universal type
2: Small size
3: stable performance
4: Simple to use
5: Reliable quality
parameter
Input voltage: 12-25V
Output voltage: 35-85V
Size: 8.5*4.5cm (manual measurement) Weight: 21.5G
list
1*Universal 10-42 inch LED TV driver board LCD TV backlight constant current board booster board
Type D :Universal 26-55 inch LCD TV LED constant current board booster board backlight high voltage board
Product selling point
1: Wide range of applications
2: Small size
3: Simple to use
4: stable performance
5: 26-55 inch universal type
parameter
Input voltage range: 10-26V DC
Output voltage range: 65-165V DC
Output current: 10MA-1000MA can be set
Size: 12*6cm (manual measurement) Net weight: 55g
The working voltage of the light bar must be any voltage between 65V-165. Can't be lower than 65V
It cannot be higher than 165V. The design limit working voltage of this product should not be higher than 165V. If this voltage is exceeded, the screen will be dark or the lamp tube will flicker. This product is only constant current, not constant voltage. The voltage will be automatically adjusted to the corresponding voltage according to the demand voltage of the light bar, so you do not need to worry about the voltage measured when it is no-load.
Regarding the description of changing the resistance, not every light bar needs to change the resistance when going back. Go back and light it up first. If the brightness is too dark, you need to increase the current by short-circuiting the resistance. It doesn't matter if it is connected to the resistance, please be aware of the maintenance colleagues!
Possible problems with correct lighting:
1. The brightness is not enough, and the screen is obviously darker than the original board. At this time, we should start from two aspects. First, after connecting the dimming feet, try to use the remote control to brighten the brightness to see if it can be solved. If it cannot be solved, test the actual situation. (Note: the brightness of my product is the largest when the voltage is 0V, and the brightness is the darkest when the voltage is high.) If it is analog voltage mode, the voltage range is between 0V-5V or 0V-3.3V, if the voltage is always high The voltage cannot be lowered and this should be adjusted. If it is a PWM signal, the voltage is stable and is 3.3V. At this time, if it is adjusted to the brightest and still fails to meet the requirements, the second solution must be implemented. Second, adjust the resistance on the board and increase the current to meet the requirements.
list
1*Universal 26-55 inch LCD TV LED constant current board booster board backlight high voltage board
Type E : General purpose LCD TV backlight board below 65 inches LED boost constant current board
Product selling point
1: Wide range of applications
2: Small size
3: stable performance
4: Simple to use
5: General purpose below 65 inches
【Input voltage range】10-28V
【Output voltage range】8-165V
[Support range] Any below 65 inches
【Interface definition】VCC: 10V-28V input, GND=ground,
ENA=switch, NC=empty pin, ADJ=brightness adjustment
[Size] 11*5cm (manual measurement) Net weight: 40g
[Note!] When 12V input, the output voltage is below 80V, when 24V power supply, the output voltage is above 80V, please see clearly, buy as needed, thank you
list
1*65 inch general LCD TV backlight board LED boost constant current board
Type F : 26-65 inch universal LED LCD TV universal backlight drive light bar boost modification replacement power supply constant current integrated board input voltage 300V
Product selling point
1: Wide range of applications
2: Small size
3: stable performance
4: High quality material
5: Input voltage range 300V
parameter
Name: Universal LED LCD TV Universal Backlight Drive Light Bar Boost Modification Replacement Power Constant Current Integrated Board
Input voltage 300V
Output voltage 34V-180V
Current 50-1000MA
The power input can be 300V of the original machine
Size: 11.5*5cm, (manual measurement)
Weight: 74.4G
list
1* Universal LED LCD TV universal backlight drive light bar booster modification replacement power supply constant current integrated board
Type G : 10-48 inch universal LCD TV LED backlight constant current board boost universal drive board light bar high voltage board
Product selling point
1: Wide range of applications
2: stable performance
3: Reliable quality
4: Small size
5: Simple to use
Product parameters
VCC: 12-45V
ENA: 2.5-5V
Vout: 15-170
ADJ: 0-5V
lout: 200MA
Size: 9*6cm (manual measurement)
Weight: 43.3g
list
1*10-48 inch universal LCD TV LED backlight constant current board boost universal drive board light bar high voltage board
Operating Temperature : LED boost constant current board
Model Number : LED backlight constant current universal board booster driver board
Application : Computer
is_customized : Yes
Origin : Mainland China
Brand Name : diymore
Package : SMD
Dissipation Power : Universal
Condition : New
Type G : 10-48 inch LCD TV LED boost drive board light bar high voltage board
Type D : Universal 26-55 inch LCD TV LED constant current voltage board
Type F : LED modification replacement power integrated board input voltage 300V
Type A : 26-55 inch LED backlight constant current universal board
Type : Voltage Regulator
Type E : General purpose LCD TV backlight board below 65 inches LED
Type B : Universal 10-48 inch LED TV constant current board LCD TV backlight
Type C : Universal 10-42 inch LED TV driver board LCD constant current board