VDIAGTOOL OT100 Brake Oil Tester

This device provides a reference for judging whether the brake fluid is still usable or needs to be replaced.It mainly used for detecting the quality of the brake fluid, so as to ensure that the brakes are sensitive and drive safety.

Advantages of OT100 Brake Fluid Tester

1. LCD display the test result to tell you the quality of brake fluid2.Long probe designed for Motor vehicle,no need to take oil outside3.Wide Range Test to Support DOT3、DOT4、DOT5.1 different brake fluid.

Using Instruction

1.Open the hood and find the dipstick2.Press the power button to turn on the turbine oil detector.3.Pull out the engine dipstick and put the probe into the dipstick hole4.Click the button switches to turbine oil detection status5.Wait for 10 seconds for to show the test results,click the the button to clear the measurement resultsNotice:The oil temperature should belower than 60 degrees during testing.Otherwise,the oil tester probe will broken .

Measurement Results Explanation

1.below 30%,high water content, it is recommended to replace the brake oil.2.between 30%-80%,your car brake oil content some water,but still able to work.3.above 80%,your brake oil is in good condition.

Details

Package

1*brake fluid tester1*packing box

（battery is not included）