+

WD5-24S05A1 wide voltage input 5W DC-DC single channel isolated output 24 turn 5V power module

USD 13.78USD 14.98

WD5-24S05A1 wide voltage input 5W DC-DC single channel isolated output 24 turn 5V power module

Description

Supply WD5-24S05A1 single output DC-DC 24 turn 5V power module 5W 1000mA

AI Pu authorized the market agent to supply a full range of power modules.
WD5-24S05A1 wide voltage input 5W DC-DC single channel isolated output 24 turn 5V power module
Wide range input (2:1)
Conversion efficiency (typical 82%)
Switching frequency: 300KHz
Long term short circuit protection, automatic recovery
High isolation of input and output
Straight plug installation on PCB board
Metal shell, low output ripple
WD5-24S05A1 input voltage 18~36V
Output voltage output 5V
Output current output 1000mA
Size:
25.40 x 25.40 x 10.16mm
1 x 1 x 0.400inch
Product type: WD3-5W (A1) series
Product model: WD5- - S*A1
Package size: 25.4 x 25.4 x 10.16mm
Output power: 5 W
Input voltage: 9-18Vdc
Output voltage: 5,12,24, + 5, + 12, + 24Vdc
Typical performance of power module: wide input voltage 2:1 (maximum: minimum) conversion efficiency typical 82% wide operating temperature range: -40 ~ 85 C input and output isolation voltage: 1500Vdc output short circuit, overcurrent protection (automatic recovery) aluminum shell output voltage accuracy: main circuit + 1%, auxiliary circuit + 3% ripple and noise (20MHz, nominal input) Voltage:: Vo is less than 5.0V, less than 50mVp-p; Vo is more than 48V, less than 180mVp-p; Other, less than 100mVp-p, output voltage between 3.3-48VDC any voltage can be produced.
  Typical performance Typical performance
Wide range input Wide Input voltage range (2:1)
Conversion efficiency (typical 82%) Typical Efficiency 82%
Switch frequency Switching frequency:300KHz
Long term short circuit protection, automatic recovery of Short circuit protectiON, Self-furbish
Input and output high isolation Input-output isolate
Install Board in-line type installs on PCB board directly.
Metal shell, output ripple low Metal case, Low Output Ripple
Technical parameters test conditions: without special designation, all parameter tests are measured at nominal input voltage, pure resistive rated load and room temperature at 25 C.
Technology parameter Test condition: General Nominal Line, Tc=25 degrees C, Rated resistant load, Rated
 

 

Specification

Material : +

+