+

WS2815 (WS2812B Updated)RGB LED Pixels Strip Light Individually Addressable LED Tape Dual-Signal 30/60/144 Pixels/Leds/m DC12V

USD 4.84USD 6.81

WS2815 (WS2812B Updated)RGB LED Pixels Strip Light Individually Addressable LED Tape Dual-Signal 30/60/144 Pixels/Leds/m DC12V

Description

&Note: 

1).The price is only Led Strip, Not Included Power Supply or Led Controller!
2).WS2815 Must Use DC12V Power Supply AND A WS2811/WS2812 Led Controller to Control!
3).Every 0.5meter with solder joints, please note!
Pay Attention: 
30 Means :30Leds/m
60 Means :60Leds/m
144 Means:144Leds/m
IP30: Non- waterproof
IP65: Waterproof in Silicon Coating
IP67: Waterproof in SiliconTube
Product Specifications:
LED light source: WS2815 LEDs 
Input voltage:DC12V; 
Power:30leds/m----9watt/meter
            60leds/m----18watt/meter
           144leds/m----34watt/meter
LED Resource:WS2815 led(5050 SMD RGB LED with built-in improved version of ws2811 ic)
LED: Each LED is separately controlled
IC Type:Improved Version WS2815 IC(built inside the 5050 smd rgb led) 
of IC:1 IC drives 1 led chip
Pixels: 30/60/100/144/meter; 
Pitch:16.6mm(1000/64); 
Grey Scale: 256;
Bits/color: 8-bits/color;
FPC Width: 30leds/m----10mm
                    60leds/m----10mm
                    144leds/m----12mm
FPC Color: White/Black PCB
Protection Tate:IP30/ IP65 /IP67
Colors:Full Color RGB, Dream Color Changing; 
Cuttable:Every LED is cuttable; 
Package:In anti-static bag,IP30 IP65 with 3mm adhensive tape on the back(IP67 without 3mm adhensive)
Working Temperature:-40 ~ 70 °C
Storage Temperature:-50 ~ 80 °C
Source Life:50,000 hours
Connector:4PIN Connector terminal pair
(Red: 12V power , green: Date line,  Blue: standby date line,Black: GND)
Main Feature:
1*One pixel damaged will not affect the other LEDs working; 
2*Dual signal wires version, signal can jump to transfer;
3* The power protection,if +12V and GND reverse polarity,the LED will not be burned;
4*The original electronic devices integrated,it does not cause virtual welding in the installation process;
5*Same protocol as WS2813S with Dual-signal wires,so can be controlled by the same WS2811/WS2812 controllers;
@:1).all the electronic components are integrated in a 5050 lamp beads, it does not require any other peripheral auxiliary electronic components to form a complete external control pixels. While reducing the product at the time of installation inverted Weld, caused by poor.
2).serial cascade interface, dual-line signal transmission, to achieve the functions of HTTP, which under a single pixel without causing damage to its lower pixel normal lighting, silk ho does not affect the overall results.
3). intelligent reverse polarity protection, product installation access 5V power supply in case of reverse, will not cause damage to the lamp beads.
4).built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
5). the transmission distance between any two points in less than 5 meters without any additional signal amplification circuit.
6). when a refresh rate of 30 frames / sec, the number of cascades of not less than 1024 points.
7). the data transmission speed of up to 800Kbps. Light color consistency, cost-effective.
Function Description:
(1).Happy control a single lamp, water, windows, rear meteor, chasing, pattern change animation, video, text, and so on. 
(2).Use of the lamp, in which a pixel bad, does not affect the normal operation of other lights so as not to affect the overall results. 
(3).Any color can show, random combinations into any pattern, in particular made light of the screen to use. 
(4).No separate address to write to the lamp can be achieved HTTP, installation easier.
(5). Meanwhile lamp beads which also integrates a capacitive resistance, so that electronic components do not need to be on board the auxiliary light bar, thus increasing the stability of the product.
LED WS2815 strip use for :
1\The product rich colors and bright light, high visibility, more visually appealing; 
2\Is widely used in the corridor wall, indoor decoration, product model decorative lighting, decorative lighting consoles, speakers decorative lighting, entertainment, wine cooler bar backlight, smallpox backlight, LED light boxes, LED luminous signs, aquarium supplies, car decoration etc;
3\it is to replace the traditional neon signs, fluorescent lamps and a new generation of lighting so on.

Specification

Strip type : SMD

Certification : FCC

Average Life (hrs) : more than 50000Hs

Occasion : Living Room

Origin : CN(Origin)

Brand Name : TNALANT

Power Generation : Switch

Certification : ROHS

Certification : CCC

Voltage : 12V

Is Smart Device : Yes

Power Source : DC

Color Temp(K) : 2200-6500K

Item Type : Strip

Certification : ce

LED Chip Model : SMD5050

LED Chip Brand : Epistar

Waterproof : Yes

Power Consumption (W/m) : 11.52W/m

Model Number : WS2815 WS2813 WS2812B

Specifications (light beads / m) : 144

LEDs Number/M : 30/60/144 leds/m

+