Description

Description: Name: Battery Charge NC Switch Control Voltage: DC 6-60V Control Current: 10A (max) Control Accuracy: 0.1V Display Accuracy: +/- 0.1V Voltage Percent Calculation: Battery Voltage / (Upper Limited Voltage - Lower Limited Voltage) Output Type: Direct Output, Output Voltage / Current = Input Voltage / Current Control Type: Voltage Control, Relay Control Switch, Support use while charging Fit for: All kinds of batteries, lithium batteries, etc. Size: 79x42mm Parameter Settings: 1. Long press SET key to enter setting. 2. Short press SET key to switch setting parameters. 3. Adjust the parameters by pressing UP/DOWN, and support short press and long press (fast increase or decrease). 4. Long press SET key to exit setting. Key function description in running interface: 1. Short press SET to display the currently setting parameters. 2. Short press UP to switch displaying charging percentage and time. 3. Short press DOWN to turn ON/OFF the relay enable; if closed, display OFF reminder. 4. Long press UP to turn ON/OFF the LCD backlight dormant state (L-P), OFF: constant, ON: Automatically lights off after 5-10 minutes. Intelligent charging time recording function: If the charging time control is not turned on, the product will record a full charging time. When entering the time display interface, flash display charging time; Empty when exit or the next charge opens (relay conduction). Serial UART data upload and parameter setting function (TTL level): Please check the product display picture for detail operation statement. Note: 1. Generally, the charging current is about one tenth of the battery capacity. Please control the current to avoid damage. 2. This module is only used as the control switch module and cannot adjust the voltage and current. Package: 1 * 10A 6-60V Battery Charger Protection Module Description: Name: Battery Charge NC Switch Control Voltage: DC 6-60V Control Current: 10A (max) Control Accuracy: 0.1V Display Accuracy: +/- 0.1V Voltage Percent Calculation: Battery Voltage / (Upper Limited Voltage - Lower Limited Voltage) Output Type: Direct Output, Output Voltage / Current = Input Voltage / Current Control Type: Voltage Control, Relay Control Switch, Support use while charging Fit for: All kinds of batteries, lithium batteries, etc. Size: 79x42mm Parameter Settings: 1. Long press SET key to enter setting. 2. Short press SET key to switch setting parameters. 3. Adjust the parameters by pressing UP/DOWN, and support short press and long press (fast increase or decrease). 4. Long press SET key to exit setting. Key function description in running interface: 1. Short press SET to display the currently setting parameters. 2. Short press UP to switch displaying charging percentage and time. 3. Short press DOWN to turn ON/OFF the relay enable; if closed, display OFF reminder. 4. Long press UP to turn ON/OFF the LCD backlight dormant state (L-P), OFF: constant, ON: Automatically lights off after 5-10 minutes. Intelligent charging time recording function: If the charging time control is not turned on, the product will record a full charging time. When entering the time display interface, flash display charging time; Empty when exit or the next charge opens (relay conduction). Serial UART data upload and parameter setting function (TTL level): Please check the product display picture for detail operation statement. Note: 1. Generally, the charging current is about one tenth of the battery capacity. Please control the current to avoid damage. 2. This module is only used as the control switch module and cannot adjust the voltage and current. Package: 1 * 10A 6-60V Battery Charger Protection Module